Guided Toughened Glass Screen Protective Film for iPhone Paste it!

Index

・I am afraid to use Apple Care once
・It was perfectly patchy with a thick glass sticking support goods
・Tempered glass is thick, but it is surprisingly uncomfortable

Installation time: 30 minutes
bought this time: 999 yen
Difficulty: Medium

I am afraid to use Apple Care once

After obtaining iPhone X in November 2017, I use it comfortably (a bit heavy).
そして、 I let it submerge the other day and replaced the main body with Apple Care.

Apple Care can only be used twice in two years, and as I am using au's 'smartphone model half price campaign' I also want to keep one more Apple care for the time I was broken, when I changed my smartphone two years later.


To say that ... basically, it is better not to use the "exchange at Apple Care" means anymore. It will be (^ _ ^;)

Even if the screen cracked, I decided to stick the film to the LCD screen, which I did not care so much because it was tough.

It was perfectly patchy with a thick glass sticking support goods

There are quite a lot of iPhoneX 's liquid crystal protective films, with guides, can you put it well? I thought, amazon recommended it here.

【2枚セット】Nimaso iPhoneX 用 強化ガラス液晶保護フィルム 【日本製素材旭硝子製】【ガイド枠付き】3D Touch対応/業界最高硬度9H/高透過率 (iPhone X 用)

↓It is in a solid box.

↓As I opened it up, the guide and other goods were in as if the smartphone was in.

↓Twice carefully removed the dust goods so that it can be pasted after carefully taking care of it twice.

↓There is also a detailed explanation properly in Japanese properly. I read it once in a while.

Basically, wipe firmly with the oil-removing sheet, remove the dust on the screen with something like dust-sticky adhesive tape, It seems that just using the guide to paste the glass.


↓The guide looks something like this. Of course it is only for iPhoneX.

↓I attached a guide. Although it is perfect to a certain extent, there seems to be a little play with iPhoneX. It seems better to take a moment ...

↓First of all, with an oil separating sheet, remove the oil on the screen firmly ...

↓Furthermore, I will wipe cleanly with a cloth like the attached glasses wipe.

↓And finish, remove the fine dust that remained on the screen, with the attached adhesive tape, petapeta and remove. Be careful not to touch the screen ...

↓I think that I could remove the dust, pat!

↓I think that it is best to use it as it is, but ... I will paste the glass film here.

↓First, I will set up a guide. Since there is still a little play, adjust the position of the guide so that it will come in the middle as much as possible.

↓Well, it is finally the emergence of the main glass film! Here as well, one by one, it is packed securely protected.

↓After peeling off the film on one side of the glass film, carefully hit the guide from above and stick it to the liquid crystal.

↓Because it is glass, it does not bend much. I will slowly drop the glass film as a guide so that no air enters.

↓Paste, you can do it! Was it possible? (^ _ ^;)

Tempered glass is thick, but it is surprisingly uncomfortable

↓Removing the guide is like this. There seems to be almost no deviation of the pasting position of the glass. Was it better to consider misalignment of the guide as much as possible?

↓There was a place where there was a little air in at the top end. Is it because of the liquid crystal on the iPhoneX side? Or is it due to glass film?

↓Air is left on the side for a while (this has gone away in a few days).

↓Looking at the lower left corner, it seems that there is only a little air in after all. It was lost in a few days.

↓When attaching a case and displaying the screen, it looks like this, there is little sense of discomfort in appearance.

↓If you look closely and see it, you can see that there is a thickness of the glass. Because it is glass, there is a firm thickness.

↓The upper side looks like this. Although it may seem to be slightly misaligned, looking from the front, I am addicted to it properly (^ _ ^)

↓ When this paste is over, there is already another set, so it has become like it can be put in the original owl. As it can be kept like this, if the glass gets scratched, if you do this work again, it will be brand new (^ ^)

Actually using it, touching the surface of the glass is a bit more slippery than when nothing is attached, It feels good to touch.

Even though it is a thick glass, I react so much to this point. It reacts to the touch of the screen much less uncomfortable.
However, indeed, was it only when I just touched the screen for a moment, or was it reacting when not sticking anything? There are things like that.

Anyway, it never got displaced, never got any bubbles in it, so it got beautiful, so it was nice.

This Guided amazon featured LCD protection glass it's recommended! (^ - ^)