ENE FARM Avoidance during protection operation is quite difficult (^

ENE FARM Avoidance during protection operation is quite difficult (^ _ ^;)

2017/04/12

Index

・It was also during protection operation (^ _ ^;)
・Always forget, once every twenty-seven days for 12 hours
・Be careful with continuous use of gas during protection operation
・I want you to loosen the gas leak check standard a bit more ...

It was also during protection operation (^ _ ^;)

I built a new building in August 2015 and attached ENE FARM with sunlight.
The composition of sunlight and Enefarm is like this.

Enefarm stop once a month ··· Protective operation in progress Although I am writing an article, I will go out once every few months · · · Forced stop of Ene Farm.

Because it is a gas leakage check, it can not be avoided by any means, Enefarm stops for 12 hours every 27th.
But, if you can stop that 12 hours at your convenience, much waste will be reduced.

For example, stopping Enefarm when going on a trip overnight, or going out on a holiday, so if you stop it from the day before, and turn on Ene Farm as soon as you come back.

However, if you forget to take advantage of that timing, the ene farm will be in protective operation at unexpected timing,
Enefarm stops for more than 12 hours (-.-;
Always how to use electricity, when to put hot water in a bath,
There is a habit of thinking mainly about Enefarm. When Enefarm stops, what should I do now ... (^ ◇ ^;)

Always forget, once every twenty-seven days for 12 hours

Enefarm's instruction manual, Enefarm,
"stop the power generation for 12 hours once every 27 days"
And there.
That means that to avoid the protection operation, once every 27th, It is good to stop Enefarm for more than 12 hours at a timing that is convenient for you. .

I know that, but ... "Once every 27th" is entered in the calendar and managed.
By about 25 days, I will put the energy farm in the state of "prohibiting power generation" at the timing when I do not have a little longer at home.
Then you can stop Enefarm once per month very efficiently. · · ·
It was supposed to be (^ _ ^;)

Why are you suffering from a sudden, Enefarm "under protective action" while you manage it so far?
It is ... to misunderstand "stop power generation for 12 hours", 8 to 10 hours ...

I am sorry for a bit of aho reason ... I will forget. About a year and a half have passed since I started Enefarm, I'm still saying that (^ _ ^;)

As reasons (excuses), since we are managing the stops about once a month by writing them on a calendar, It is pretty much avoidable. In the meantime, the memory will gradually dilute how many hours to stop.

And when it is time to stop Enefarm when there are no plans to leave the house so long, I will stop at 10 o'clock in the evening, and it will turn on the next morning around 10 o'clock. It's okay if you leave as long as 12 hours, right? While thinking ...

Certainly 12 hours should be enough, but in just about 12 hours, it will not be recognized as one stop on 27th as seen from Enefarm

I already remember! Once every twenty-seven days, with 12 hours and 2 hours with 14 hours,
Stop Enefarm at your own timing! I will try to remember! ! (T ^ T)

Be careful with continuous use of gas during protection operation

We use gas floor heating in winter. At Tokyo Gas,
It is very profitable because there is "floor warming" in "Electric Fuel Electric Power Plant".
In winter it is really helped to the floor warmth. Just · · ·
in Enefarm "Protective operation in progress", Floor heating is prohibited (^ _^ ;)
Error 01F0 in Ene Farm: Total floor heating is NG during protection operation
If you use floor heating during protection operation, the period during protection operation will increase (-.-;

However, when it comes to protection during cold weather, it is a bit of a fact that we do not use floor heating at all.
Even during protection operation, it can not be helped. Even if the time zone during protection operation grows, I will use floor heating (^ _ ^;)
Still, as much as possible, cut the floor warming as quickly as possible, and then wait until the "protecting operation in progress" ends.

I want you to loosen the gas leak check standard a bit more ...

After all, if you do not want me to stop at 12 hours a day on Enefarm 27th at inadvertent timing,
I have to work hard on my own and have no choice ... · · · (· _ ·;

However, Enefarm can only be started once a day, and it is necessary to stop for 4 hours (until the Panasonic 2016 model)
I think that it would be good if you check gas leaks in that 4 hours.

I wonder what will happen ...
Panasonic, Tokyo Gas! (◎ _ ◎;)

ページトップへ戻る